I believe everyone knows why elevators are decorated with stainless steel plates, but I believe many people still don't know why they use mirror stainless steel to make elevator decorative plates. Because the interior of the elevator is a narrow space, in order not to make people feel depressed, the designer used mirror stainless steel, which can not only maintain the beauty of the interior of the elevator, but also visually expand the interior space of the elevator, so that people will not feel depressed. As for how to make this kind of beautiful and practical stainless steel mirror decorative board, I'll show you!
The manufacturing principle of mirror stainless steel plate is to polish the raw materials of stainless steel plate on its surface with grinding liquid through polishing equipment, so that the surface of stainless steel plate is more flat and the brightness can be as clear as a mirror. The manufacturing principle of mirror stainless steel plate is to polish the raw materials of stainless steel plate on its surface with grinding liquid through polishing equipment, so that the surface of stainless steel plate is more flat and the brightness can be as clear as a mirror.
Common mirror stainless steel is divided into 6K, 8K and 10K. It is generally ordinary polishing, ordinary 6K, fine grinding 8K, super fine grinding 10K effect. Generally, there is no big difference for the same thickness, and the 10K mirror is brighter; The thicker the thickness, the worse the effect and the higher the processing cost.
The grinding part has three processes: rough grinding, semi fine grinding and fine grinding:
1. Rough grinding: grind the workpiece on three sides with 600 abrasive belt. In order to remove the collision damage between the welding spot left by the workpiece welding and the previous process, so that the weld fillet is initially formed, and there is basically no major scratch and bump on the horizontal and vertical planes.
2. Semi fine grinding: grind the workpiece with 800 abrasive belt, and polish the workpiece back and forth according to the following method, mainly to correct the joints of the previous process, and further fine grind the traces generated after rough grinding. The marks left by the next process should be polished repeatedly to make the surface of the workpiece free of scratches and basically bright.
3. Fine grinding: 1000 abrasive belt is mainly used to correct the fine lines in the previous process. The grinding method is the same as above. The purpose of this process is to make the joint between the grinding part and the non grinding part of the workpiece basically disappear and make the workpiece surface brighter.
Finally, polishing can make the surface of stainless steel achieve the effect of mirror. When carrying out mirror polishing, be sure to pay attention to the grinding head flowers and sand holes on the surface of stainless steel plate
When stainless steel plates are processed with polishing equipment, the slower the speed, the more groups of grinding, so the effect of processed stainless steel plates is also the best. When stainless steel plates are processed with polishing equipment, they must be sanded before being put into the grinding fluid.
There are 8 groups of grinding heads with different thickness to grind. Grinding can also be said to be the treatment of the surface of stainless steel plate. This step is mainly to remove the oxide layer on the surface of stainless steel plate.
Through the above steps, the surface of stainless steel can achieve the effect of mirror.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist