Metal Industry and Production of Perforated Plates

There are different types of perforated sheets: 45-degree punched holes are arranged at 45 degrees, which are rarely used.Only a few rigs have industry-standard equipment.O 60 degree piercings are arranged at 60 degrees and this provision (also known as Quinconces) is more dispersed as it combines the high rigidity of the plate with the discreet relationship with the entire vacuumTherefore, this is considered \"normal\" and drilling is done like this without other regulations.O 90-degree perforation arranged in parallel.This provision applies to display boards, commercial equipment, and sometimes is very common in any case because of decorative piercings (the front of the radio, etc ).The materials are usually perforated stainless steel, ordinary steel, aluminum, brass, copper and other non-ferrous metals, Teflon, polypropylene openings and other plastics.Production of padded sheet (Lacrimosa.The padding is passed to the rigidity of the board and allows for weight reduction compared to similar laminated materials.The filler can be a diamond from Bartonella, Redondo or square.The application of veneers or tearful pillows is in the field of reinforcement element channels or walls, the Gates fund.The padded plate is the plate that runs on the track and is mechanically stamped with punching machines and cold-processed materials (such as iron, galvanized steel, stainless steel, aluminum and copper.Stretch sheet production and stretch sheet can be produced in rollers and sheets with different materials, and the thickness and standard size can be ordered and measured.For commonly used stretch steel plates, irons and aluminum plates or rollers, the plates are divided into stretch diamond mesh, square mesh, hexagonal mesh.Used for the production of metal nets and barbed wire for the manufacture of compounds or compounds as guards and construction fields.These networks are subdivided into metal welding nets, electric welding nets and vibrio-sieves.The network is used for rolling protection and various enclosures.Wave mesh is usually made of square mesh extruded carbon steel, but can also be made of galvanized wire, plastic coated wire, stainless steel, copper, brass and aluminum.Network of V.The sieve is a fishing net woven with high strength steel.sieves.The production of the silk cloth is obtained by weaving the silk loom, and the continuous automatic mesh yarn is defined.So the wires form a grid.Silk fabric is distinguished by unique, pointed cross or cross taenioids.For the production of silk cloth using stainless steel, galvanized wire, aluminum, copper and brass.