Errors that occur when stainless steel plate is processed

Errors that occur in the processing of stainless steel plates When processing various stainless steel plate products, it is necessary to first process the surface of stainless steel. Affected by various factors, there may be certain problems on the surface, such as weld defects, and scratches may appear in the performance. Poor grinding and polishing results may also cause poor stainless steel surfaces. Stainless steel surface processing, the welding seam defects are more serious, which are often encountered in stainless steel surface processing. The manual mechanical grinding treatment method is used to make up for it. The grinding marks produced will cause the surface to be uneven and affect the appearance. The problem of inconsistent surface is that only pickling and passivation is performed on the weld, which also causes uneven surface and affects the appearance. The scratches are difficult to remove, the overall pickling passivation, and the various scratches generated during the processing cannot be removed, and the carbon steel, splashes and other impurities adhering to the stainless steel surface due to scratches and welding spatter cannot be removed, resulting in Rust occurs when chemical corrosion or electrochemical corrosion occurs in the presence of corrosive media. For the uneven grinding, polishing and passivation of stainless steel surface processing, pickling and passivation treatment is carried out after manual grinding and polishing. For workpieces with large areas, it is difficult to achieve a uniform treatment effect, and an ideal uniform surface cannot be obtained. And the cost of working hours and auxiliary materials are also higher. Pickling passivation paste is not a panacea, and it is difficult to remove the black oxide scale produced by plasma cutting and flame cutting. In the process of hoisting, transportation and structural processing, the scratches caused by human factors such as bumping, dragging, and hammering are more serious, which makes the surface treatment more difficult, and is also the main reason for rust after treatment. There are currently two types of stainless steel checkered plates. The first type is produced by the same rolling mill during production. The pattern of this steel plate is relatively stiff and the pattern is relatively fixed, but the thickness is relatively large, which is 3-- About 6MM, and to make it produce patterns, it needs to go through some technological processes, such as stainless steel billet → hot tandem rolling mill black coil → thermal annealing and pickling line → skin pass mill, tension leveler, polishing line → cross-cutting line → Hot-rolled stainless steel checkered plate. At the same time, it also has a feature, that is, its one side is flat and the other side is patterned. This kind of patterned plate is usually used in some places with high temperature requirements, such as railways, platforms, etc., all of which need to be used. The use of patterned boards is also relatively wide. The second type of stainless steel checkered plate is the common processing enterprises in the market. They need to buy hot-rolled plates for production needs, and then make the patterns through machinery. It is usually convex on one side and concave on the other side, and is often used for decoration. use.

Foshan Topson Stainless Steel Co., Ltd. is recognized as one of the leading manufacturer of in China.Trust in us and make Foshan Topson Stainless Steel Co., Ltd. your architectural metalwork supplier. Our products will bring more economic value to you.

Compare the various types of that are available. At Topson Stainless Steel Decorative Sheets&Metal Fabrication Works, the range is constantly being updated with new models, technical details and competitive prices.

Rewards and discount programs give customers more reason to come back for architectural metalwork again, especially in the competitive retail and services markets.