Do you know how to clean 316L stainless steel plate?

How to clean and preheat 316L stainless steel plate? Before the spraying (throwing) treatment, the grease and fouling on the surface of the 316L stainless steel plate are removed by cleaning, and the pipe body is preheated to 40-60 °C by a heating furnace to keep the surface of the 316L stainless steel plate in a dry state. When spraying (throwing), the surface of the 316L stainless steel plate does not contain grease and other dirt.

It can enhance the effect of rust removal, and the dry surface of 316L stainless steel plate is also conducive to the separation of steel shot, steel grit, rust and oxide scale, so that the 316L stainless steel plate after rust removal can be separated. The surface is cleaner. First of all, a major feature of 316L stainless steel plate is that its energy consumption is relatively low compared to other similar pipes. Secondly, because it has a high temperature coating, it has good heat resistance and oxidation resistance.

In this way, in the whole process of blowing oxygen, it can consume only low energy, thereby reducing the cost of work. Secondly, the quality of 316L stainless steel plate is relatively high for any product. It has very strict quality requirements and standards in each link from the selection of raw materials to the production and processing. You can rest assured of the quality of 316L stainless steel plate, which is the conclusion drawn after extensive experiments, which is one of the reasons why countless consumers have been choosing 316L stainless steel plate.

316L stainless steel plate production and use 316L stainless steel plate is used for steelmaking oxygen blowing pipes, generally small-diameter welded steel pipes, with eight specifications ranging from 3/8 inches to 2 inches. Made of 08, 10, 15, 20 or Q195-Q235 steel strip. In order to prevent corrosion, some are aluminized. 316L stainless steel plate application: Oxygen or other gases are transported in electric arc furnace steelmaking, and steel is melted and refined in the electric arc furnace.