Professional Stainless Steel Sheets Manufacturers Provide Technical Specifications for Custom Metal Fabrication, Stainless Steel Decorative Sheets and Metal Fabrication Works

Color stainless steel plate manufacturers introduce the life of color stainless steel plate

by:Topson     2022-08-15

With the widespread use of colored stainless steel plates, colored stainless steel pipes can be seen in subways, hotels, shopping malls, and home decoration. In this regard, many people have doubts about the use of such a wide range of color stainless steel plates. What is the service life of the colored stainless steel plates? The color fades or rusts after a year or two, and it is too troublesome to replace them in batches. The cost is not low. Between this problem, the color stainless steel plate manufacturer Bohai Metal will specifically talk about the service life of the color stainless steel pipe:

1. The length of electroplating time

Generally speaking, to measure the service life of a color stainless steel plate, it mainly depends on the length of the electroplating time of the color stainless steel plate manufacturer on the bottom plate. In theory, the longer the electroplating time of stainless steel, the higher its corrosion resistance. Due to a series of problems such as cost and production capacity, plate manufacturers generally control the electroplating time to 12-15 minutes, and even set the electroplating time to about 10 minutes, which will greatly reduce the life of the entire color stainless steel plate.

2. The material problem of the bottom plate

Generally, conscientious manufacturers will use stainless steel plate as the bottom plate of electroplated stainless steel plate, because the high-quality corrosion resistance and heat resistance of stainless steel plate can be used in most environments, but some manufacturers use material in order to save costs. The poor stainless steel is used as the bottom plate. After the color is plated through the electroplating process, there is no difference with the naked eye, but time will prove all this. With the passage of time, white spots and rust will appear on the colored stainless steel plate. and so on.

In addition to the above two factors, under the quality assurance of the color stainless steel plate, the conditions during use are also the main reasons for affecting the life of the color stainless steel plate, such as the harsh environment of use, and the lack of timely maintenance and maintenance. , The life of the color stainless steel plate can be used for a few years. Under normal circumstances, it should be able to keep the color unchanged for 10 years. As long as the surface is cleaned with a cleaning agent, it can be said that the high-quality color stainless steel plate can be used for a long time. 10+ years without any problems.

For the usual maintenance of colored stainless steel plates, we have also summed up, roughly in the following ways:

1. Cleaning method

When cleaning the surface of the colored stainless steel plate, care must be taken not to scratch the surface, avoid the use of bleaching ingredients and abrasive detergents, steel balls, grinding tools, etc. In order to remove the detergent, rinse the surface with clean water at the end of washing.

2. How to deal with dust

If there is dust on the surface of the colored stainless steel plate and the dirt that is easy to remove can be washed with soap and weak detergent, the binder component, use alcohol or organic solvent (ether, benzene) to scrub.

3. Grease

The grease, oil and lubricating oil pollution on the surface of the stainless steel color plate should be cleaned with a soft cloth, and then washed with neutral detergent or ammonia solution or special detergent.

4. Acid corrosion

Bleach and various acids are attached to the surface of the colored stainless steel plate. Immediately rinse with water, then soak with ammonia solution or neutral carbonated soda water solution, and wash with neutral detergent or warm water.

5. Rainbow pattern on the surface

The rainbow pattern on the surface of the colored stainless steel plate is caused by excessive use of detergent or oil. It can be washed off with warm water neutral detergent when washing.

6. Attached rust

The rust caused by the dirt on the surface of the colored stainless steel plate can be washed with 10% nitric acid or abrasive detergent, or it can be washed with special detergents.

Color stainless steel maintenance

To sum up, the life of the color stainless steel plate is not only a unilateral issue of the strength of the color stainless steel plate manufacturer, but also very important for the usual maintenance.



Foshan Topson Stainless Steel Co., Ltd. have now decided to extend our company in other countries.
We would like to offer our comprehensive service to our customers who interested in architectural metalwork.
Foshan Topson Stainless Steel Co., Ltd. emphasizes our commitment to quality in our laboratory and R&D services.
architectural metalwork allows users to use in innovative ways that fit their individual needs, while at the same time providing cost-effective, reliable and user-friendly products.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for your enquiry. We will get back to you ASAP