What is the texture of stainless steel wire drawing board?

Stainless steel wire drawing board can be divided into straight, random, line, corrugated, spinning, etc. according to the needs of decoration.

Straight-drawing refers to the process of machining straight lines by mechanical friction on the surface of stainless steel plates. It has the dual function of brushing scratches on the surface of the stainless steel plate and decorating the surface of the stainless steel plate. Straight thread drawing has two kinds of continuous thread and intermittent thread. The surface of the stainless steel plate is continuously rubbed horizontally and straightly, and a clean cloth or stainless steel brush can be used to obtain continuous lines. The diameter of the stainless steel brush wire can be changed to obtain different coarse and fine lines. Intermittent silk patterns are usually processed on a brush or patterning machine. Production principle: Two sets of differential wheels with the same direction are used. The upper group is a fast-rotating grinding roller, and the lower group is a slow-rotating rubber roller. The stainless steel plate is brushed with fine intermittent straight lines through two sets of rollers.

Random wire drawing is an irregular and obvious matte wire pattern obtained by moving the stainless steel plate left and right under the high-speed copper wire brush. This processing technology has high requirements on the surface of the stainless steel plate.

Ripples are usually made with brushes or patterning machines. The waveform is obtained by the axial movement of the upper grinding roller, and the brush body is worn on the surface of the stainless steel plate.

Spinning, also known as spinning, is a filamentary pattern obtained by rotating and polishing the surface of a stainless steel plate using a cylindrical felt or nylon wheel, kerosene and polishing paste installed on a drilling machine. Mainly used for decorative processing of round signs and small decorative plates.

The thread is a small motor with a circular felt on the shaft, which is fixed to the table about 60 degrees from the edge of the table. In addition, a mop board with a fixed stainless steel plate was made to press the tea. Apply a layer of straight edge mylar to the mop to limit the thread loops. Using the rotation of the felt and the linear motion of the mop, wipe the thread pattern of the same width on the surface of the stainless steel plate.

Foshan Topson Stainless Steel Co., Ltd.'s has been able to achieve excellent performance in an extremely competitive industry.
If you already use architectural metalwork elsewhere or want the ability to offer restricted chat access to certain individuals, architectural metalwork architectural metal fabrication offers you the most flexibility.
Latest technology and manufacturing equipment has improved the quality of architectural metalwork.