Quality identification method of color stainless steel plate-Topson-img

Provide Technical Specifications for Custom Metal Fabrication and Stainless Steel Decorative Sheets 

Quality identification method of color stainless steel plate

by:Topson     2022-03-28

With the color stainless steel plate'> the price of the color stainless steel plate is getting more and more affordable, and the application is more and more extensive. There are many unscrupulous merchants in the market who are shoddy and cut corners. This not only damages the interests of the majority of owners, but also destroys the market environment of the entire stainless steel decorative sheet.

Look at the material first:

The common materials of color stainless steel plate are 304 positive material, 304 rolling material, 201 positive material and 201 rolling material . Among them, 304 has higher corrosion resistance than 201, and the real material is smoother and brighter than the calendered material. Because of the large price difference, many merchants use shoddy products, using calendered materials to pretend to be genuine materials, and using 201 to pretend to be 304. As a result, the color stainless steel plate began to fade, rust or even break after a few months of use. Therefore, when we inspect the goods, the first thing to do is to verify whether the material of the plate is the one you specified.

201 and 304 can be distinguished by the detection potion, while the real material and the calendered material are mainly distinguished by observing the quality of the board surface. The thickness of the calendered material is the same, while the surface of the calendered material is dark, the color is uneven, often black or striped, the back has roller embossing, many sand holes, peeling water marks and other defects, the thickness difference of the board surface can reach 2 to 3 silks. However, with the improvement of the production process and technology of many large-scale calendering plants, the gap between the real material and the calendering material is gradually narrowing. Some imitation real material boards can even be faked, which requires professionals with rich experience to distinguish.

Review effect:

Color stainless steel plate is mainly used in the field of decoration, which has high requirements on the ornamental and decorative properties of the plate surface. When inspecting the goods, be sure to inspect and observe carefully. A good color stainless steel plate should have no visible color difference under direct sunlight, and no color difference in the whole batch of plates. Uniform coloring, good color, no scratches and no fading. The surface of the mirror panel should be free of grinding head flowers and horseshoe prints, with high brightness. Of course, usually the better the quality of the board, the higher the price. For the decorative field with low requirements, the requirements for the board surface can also be reduced, and more economical and more affordable decorative boards can be selected.

Then tear off the film:

The color stainless steel plate will be pasted with a protective film before leaving the factory. Many slow-moving boards have been left in the warehouse for a long time, and the protective film has become powdered, which is difficult to tear, or after tearing, there is still a lot of glue on the surface of the board, which is ugly and difficult to remove, which is time-consuming and labor-intensive. Even if it is a transparent film, when you inspect the goods, you must tear a large piece to see the quality of the film. If you need to cut and bend it later, put a protective film above 6C first to avoid scratching the board surface. After the color stainless steel plate is installed, the film layer should be torn off as soon as possible, and the glue should be applied. Especially for outdoor decoration, due to direct sunlight, tear off the protective film immediately after construction.

Anxious in finding a solution to your architectural metalwork issue? Click Topson Stainless Steel Decorative Sheets&Metal Fabrication Works to find a top architectural metal fabrication architectural metalwork company offering top quality .
Foshan Topson Stainless Steel Co., Ltd.’s mission is to provide high quality care and services to our members and to be profitable in the process.
Apart from this, exhibit myriad architectural metal fabrication benefits, like the prevention of architectural metal fabrication by enhancing architectural metal fabrication.
architectural metalwork has a great positive reflects from our dear customers.
Foshan Topson Stainless Steel Co., Ltd. really created a whole persona around architectural metalwork’s manufacturing and selling, and it's so innovative that people really respond to it.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
Thank you for your enquiry. We will get back to you ASAP
WhatApp:8618024145225 video-Quality identification method of color stainless steel plate-Topson-img-1