Professional Stainless Steel Sheets Manufacturers Provide Technical Specifications for Custom Metal Fabrication, Stainless Steel Decorative Sheets and Metal Fabrication Works

Maintenance and installation of stainless steel door panels

by:Topson     2022-09-02

The passive film of the stainless steel door has good corrosion resistance, but it is a stainless steel door that will not rust. The metal surface is exposed to electrochemical corrosion environment, chemical reaction or chemical reaction, uniform corrosion. The corrosion resistance of the passive film on the surface of stainless steel door panels has become a weak link. The pitting reaction, which forms an initiating reaction, is accelerated by the incorporation of chloride ions close to forming a highly corrosive solution. There is also intergranular corrosion cracking, and the passive film on the surface of the stainless steel door completely destroys the stainless steel door. The surface of the stainless steel door panel should be cleaned regularly to maintain its gorgeous surface and prolong its service life. There will be no scratches on the surface when cleaning. Avoid using bleach to clean parts and abrasives. Use steel balls, grinding tools, etc. to remove the cleaning fluid, rinse with water, and complete the surface treatment. The dust and dirt on the surface of the stainless steel door panel are easy to remove, and weak objects can be washed with soap, detergent or warm water. Labels and films on stainless steel door panels are cleaned with warm water and mild detergent, scrubbed with adhesive components, alcohol or organic solvents (ether, benzene). The surface of the stainless steel door panel is stained with grease, oil stains and lubricating oil. Wipe with a soft cloth, then clean with neutral detergent or ammonia or special detergent. The surface of the stainless steel door should be bleached and attached to various acids, immediately rinse with water, then soak with neutral carbonated soda solution or ammonia water, and then wash with neutral detergent or warm water. The rainbow pattern on the surface of the stainless steel door panel is made with oily cleaners or overuse and remains neutral when washed with warm water. Stainless steel door rust can be cleaned with 0.10 nitric acid or abrasive detergent, or special stainless steel door cleaning machine.


The installation of stainless steel door panels is a very important part of the entire cabinet installation process. Because the door panel is well installed, it directly affects the beauty of the entire cabinet to a certain extent. Therefore, pay attention to the installation method and installation precautions of the stainless steel door panel. So do you know what matters need to be paid attention to when installing stainless steel door panels?

Precautions for installation of stainless steel door panels:

1. The stainless steel door is an additional door installed on the basis that the cabinet has been arranged.

2. Stainless steel door panels are generally installed on the cabinet through hinges. Generally speaking, door panel installation is much simpler than cabinet installation. Most of the time to install the cabinet is spent on the cabinet.

3. After the foundation is laid, the stainless steel door panels and countertops are a step-by-step work. The installation of the stainless steel door panel allows certain errors, but it can be corrected by the adjustment function of the hinge, not to mention that the hinge has a certain adjustment function.

4. The door seam size of the whole set of stainless steel cabinets should be the same, not half as small as half, and the door panels cannot touch each other. It should be known that most of the collision of stainless steel cabinet doors is caused by the fact that the cabinets are not on the same horizontal line, and this situation cannot be solved by the hinge adjustment function. Therefore, when installing stainless steel cabinet doors, pay attention to check the installation of stainless steel cabinets.

5. After the stainless steel door panel is installed, the first thing to pay attention to is to see if the door panel is flat, and secondly to check whether each stainless steel door panel is damaged, such as accidentally leaving scratches during the decoration process.



come in many forms, like architectural metal fabrication and architectural metal fabrication, and they all provide efficient solution for our architectural metal fabrication needs.
For more advice on tips, please visit our website Topson Stainless Steel Decorative Sheets&Metal Fabrication Works. Do not hesitate to contact us if you are interested.
Foshan Topson Stainless Steel Co., Ltd. might focus its marketing efforts by highlighting its end product—improved technology and increased profits—not its producing methods.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for your enquiry. We will get back to you ASAP