How To Install A Stainless Steel Backsplash In 7 Easy Steps
by:Topson
2020-06-13
Are you ready to accept the DIY steel tailgate project that you have planned for a while?So now is the time to do it!The installation of stainless steel tailgate is full of modern appeal and features that can be completed in just a few hours with the lowest cost of renovation.You need to make some measurements before you order the materials.To do this, turn off the power of the socket around the sink and remove any socket cover or board.Stick a large piece of paper on the wall behind the sink and then cut the template to the size you want.Be sure to cut holes for any outlet.Remember to cut very carefully and precisely as this template will be used to design the final stainless steel tailgate.Bring your template to the sheet metal or home improvement store and order the product.You may want to take a picture of the area it will enter.When it comes in, collect the following materials: adhesive tape, caulking gun for kitchen use and waterproof caulking agent. Putty knife, construction glue or other adhesive 80 sand sandpaper rub alcohol Step 1: Use sandpaper on the wall where the tailgate is placed to create a good surface for the adhesive.Step 2: run a construction glue bead along the back of the tailgate and apply the glue evenly using the putty knife.Step 3: place the tailgate near the wall.Starting from one end, use flat tools such as one side of the hand or spatula to carefully smooth the steel against the wall.Step 4: put the tailgate tape in place until the adhesive is completely dry.Step 5: remove the tape and any adhesive from the edge.You can wipe it with alcohol.Step 6: run a circle of waterproof caulkers along the edge of the tailgate, or leave them as beads, or smooth them in place with your fingers.Before using the sink, let the cauldron dry completely.Step 7: use any decorative ideas you collect to make it personal.For example, you may want to make it a gallery for displaying magnets.I hope this gives you some useful tips to find and install the stainless steel tailgate yourself.At the end of the day, it will be a good choice as it is easy to clean and maintain and looks very stylish as well.
Custom message