Professional Stainless Steel Sheets Manufacturers Provide Technical Specifications for Custom Metal Fabrication, Stainless Steel Decorative Sheets and Metal Fabrication Works

How to choose the color stainless steel plate and installation process?

by:Topson     2022-08-19

Nowadays, many commercial houses, high-end shopping malls and other places gradually prefer to use more gorgeous colored stainless steel plates as decorative materials. Colored stainless steel plate can not only make a dazzling appearance, but also corrosion-resistant and durable.

Colored stainless steel ladder panels used to be directly decorated with mirror panels or drawing panels as elevator interiors. Although they are also very durable, their relatively simple appearance and color make them less suitable for popular aesthetic pursuits. Therefore, when choosing the interior decoration of the elevator car in many places, they usually prefer to use colored stainless steel plates mixed with multiple processes; for example, in order to appear more elegant and noble, they also choose titanium black, titanium gold, bronze, etc. ; Popular are titanium composite plates, such as gold mirror etched plates and titanium black brushed etched plates as decorative materials.

Colored stainless steel ladders are used as decorative panels, which are glued to the cold-rolled steel plate of the interior base plate with super glue during installation, and then folded into a composite door panel. Before installation, cut out the cold-rolled steel base plate and stainless steel plate according to the door panel size of the elevator design. Then, the bent portion of the cut substrate was cut into a V shape with a groove of about 0.3 mm. There will be a lot of debris or rust on the stainless steel surface of the tank. The surface grease and rust can be removed by phosphating treatment, and then the glue is applied; when the film is naturally dry until it is not sticky, put the two pieces together. The panels are bent together, and the accessories and door panel reinforcements are glued together; in order not to affect the appearance of the elevator, the entire door panel is reinforced by welding, and then the inner surface of the bottom plate is painted, so that the elevator installation can be completed.



In the past few decades, architectural metal fabrication production has increased because of the use of architectural metalwork.
A detailed plan must be developed if we hope to reach your profitability goal. Once we have a certain figure in mind, Foshan Topson Stainless Steel Co., Ltd. and our staff need to determine all the steps necessary to reach that goal and act on them.
Visit Topson Stainless Steel Decorative Sheets&Metal Fabrication Works for the best in architectural metal fabrication architectural metalwork supplies and get the most cost effective for your architectural metalwork solution. Design and customization are also welcomed.
Foshan Topson Stainless Steel Co., Ltd. will do this by managing our business with integrity and the highest ethical standards, while acting in a socially responsible manner with particular emphasis on the well-being of our teammates and the communities we serve.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for your enquiry. We will get back to you ASAP