Here Are Some Ways To Remove Stains From Colored Stainless Steel Sheets

Color stainless steel plate is mainly used for indoor and outdoor decoration, because it is not washed for a long time, it is easy to fall dust without friction, especially color stainless steel plate, it is more likely to be stained, can be used as decorative color stainless steel plate and how many 'color spots'! This is A very noteworthy problem, too many 'stained' tiles on the colored stainless steel plate will affect its 'appearance'.

If the surface is stained with stains, how to clean it; first of all, it is necessary to distinguish the type of stains, and different stains have different treatment methods;

1. Avoid using detergents containing bleach and abrasives, steel wool, abrasive tools, etc. In order to avoid the residue of detergent and corrode the stainless steel surface, the surface should be rinsed with clean water at the end of cleaning.

2. Dust and easily removed dirt on the surface of stainless steel can be washed with soap, weak water, adhesive components, and scrubbed with alcohol or organic solvent (ether, benzene).

3. The grease, grease and lubricating oil on the stainless steel surface should be cleaned with a soft cloth first, and then cleaned with neutral detergent or ammonia solution or special detergent.

Bleach and various acids are attached to the stainless steel surface. Rinse immediately with clean water, then soak with ammonia or neutral carbonated water, and wash with neutral detergent or warm water.

5. The rainbow pattern on the stainless steel surface is caused by excessive use of detergent or oil, and it can be washed off by neutral washing when washing with warm water

6. The stainless steel surface is rusted due to dirt, it can be washed with 10% nitric acid or abrasive detergent, and it can also be washed with special detergents.

After Z, we must pay special attention not to use sharp or rough objects to wipe the stainless steel surface, it is easy to scratch the stainless steel surface and affect its appearance! The above is the conventional stain treatment method that can basically solve the stainless steel surface. , hope this helps you.

The , essentially perfected by architectural metal fabrication, is one of the first home appliance to be widely distributed.

Foshan Topson Stainless Steel Co., Ltd.’s core aim is to afford high-quality products with the concept of manufacturing technology.

Time is one of the biggest challenges cited by manufacturing architectural metalwork.

High-quality products are huge boosts when it comes to marketing ideas; allowing potential manufacturers to place themselves in the shoes of a satisfied customer brings them one step closer to understanding the idea of architectural metalwork.